How To Build A Flat Deck

A flat deck is a platform that is raised above the ground, and can be used for a variety of purposes, such as a patio or deck. Building a flat deck is a fairly simple process that can be completed in a few hours with basic tools and materials. The first step is to measure the area where the deck will be built and mark the outline of the deck on the ground. Next, use a post hole digger to dig two holes for the deck posts. The

How To Build A Flat Deck

There are a few ways that you can build a flat deck. The most common way is to use a frame of lumber and then attach plywood or composite decking to the frame. You can also use concrete piers to support the deck, or even use pre-cast concrete slabs. It is important to make sure that your deck is level, so use a spirit level when you are framing the deck and when you are attaching the decking.

-Tape measure -Circular saw -Plywood sheeting -Ruler or a straight edge -Stapler -1 inch nails -Hammer -Paint or a sealant

  • Determine the size of the deck
  • Frame the deck
  • Determine the location of the deck
  • Attach the decking finish

-The size of your deck -Number of levels or tiers -Deck location -What type of material to use – Fasteners – Construction


Frequently Asked Questions

Can You Build A Deck Without Putting Posts In The Ground?

Yes, you can build a deck without putting posts in the ground, but it will be more unstable and may not be as safe.

How Do You Build A Deck That Sits On The Ground?

Building a deck that sits on the ground is a relatively easy process. The first step is to mark out the area where you will be constructing the deck. Once the area is marked, use a shovel to dig out the area to a depth of approximately 8 inches. Once the area has been dug out, use a level to make sure that it is flat. If necessary, use sand or soil to level the area. Next, use screws or nails to attach the decking boards to the joists. Make sure that the boards are secure and that there is no space between the boards. Finally, seal or stain the decking boards to protect them from moisture and UV damage.

Can You Build A Deck That Sits On The Ground?

It is possible to build a deck that sits on the ground; however, this type of deck is not very common. A deck that sits on the ground is typically less expensive to build than a deck that is raised off the ground, but it also has some drawbacks. For example, a deck that sits on the ground is more prone to moisture damage and it can be difficult to clean.

Can A Deck Be Built Without Footings?

A deck can be built without footings if it is less than 12 inches off the ground and will not be used for heavy loads.

Can A Deck Be Built Directly On The Ground?

Yes, you can build a deck directly on the ground; however, you will need to make sure that the ground is level and stable. You may also need to add supports or a foundation if the ground is not stable.

Does A Deck Have To Be Off The Ground?

A deck does not have to be off the ground, but it is typically recommended in order to avoid rot and water damage.

Do I Need Footing For Ground Level Deck?

Ground level decks can be built without footings, but it is not recommended. Footings provide extra stability to a deck and help distribute the weight of the deck evenly over the surface of the ground.

Can You Build A Deck Directly On The Ground?

It is possible to build a deck directly on the ground; however, it is not recommended. The deck may not be as stable as one that is built on a foundation, and it could be more susceptible to moisture damage.

Do Decks Have To Have Posts?

There is no general requirement that decks must have posts, though some builders may choose to use them to add strength or stability to the deck. In some cases, posts may also be used as an aesthetic feature to enhance the look of the deck.

Can I Build A Deck Directly On The Ground?

Yes, you can build a deck directly on the ground. However, you may want to consider adding a layer of padding, such as landscape fabric and mulch, to protect the deck boards from moisture and pests.

Do Freestanding Decks Need Footings?

Freestanding decks do not need to have footings, but they may need support posts.


To Review

Building a flat deck is a relatively simple process that can be completed in a few hours. The most important part is ensuring that the deck is level and square before securing it in place.

Posts created 1453

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top