How To Connect Galvanized Pipe Without Threads To Pvc

Galvanized pipe is a metal piping system that is used to convey water, gas, or other liquids. It is made up of steel that has been coated with a layer of zinc. PVC (polyvinyl chloride) is a type of plastic that is used for many different applications, including plumbing. It is strong, durable, and relatively inexpensive. This tutorial will show you how to connect galvanized pipe without threads to PVC.

How To Connect Galvanized Pipe Without Threads To Pvc

Galvanized pipe is a type of steel pipe that has been coated in zinc. This coating helps to prevent the steel from corroding. PVC is a type of plastic that is commonly used for pipes and fittings. It is not recommended to connect galvanized pipe to PVC without using a connector. There are several types of connectors that can be used, including slip-fit connectors, threaded connectors, and compression fittings.

-PVC pipe cutter -PVC primer -PVC cement -Tape measure -Marker -Pipe wrench -Hack saw

  • File off any burrs on cut end of pipe
  • Clean both ends of pipe with degreaser apply pvc primer to both ends of pipe apply pvc
  • Cut galvanized pipe to desired length with hacksaw

– ensure that the pipe and fittings are of the same diameter – use primer and cement to attach fittings to the pipe – make sure that the pipe is clean and dry before applying primer – apply primer to both the pipe and fitting – apply cement to the outside of the fitting – insert the pipe into the fitting and twist until it is fully seated


Frequently Asked Questions

Can You Mix Galvanized And Pvc Pipe?

Galvanized pipe is coated in zinc to prevent rusting, while PVC pipe does not corrode. So, the two types of pipe should not be mixed as the zinc coating on the galvanized pipe will eventually flake off and contaminate the PVC pipe.

Can Pvc Be Connected To Galvanized Pipe?

Yes, PVC can be connected to galvanized pipe. PVC and galvanized pipe are both considered watertight pipes, so they will not leak when connected.

How Do You Connect Galvanized Pipe To Plastic?

There are a few ways to connect galvanized pipe to plastic. One way is to use a coupling, which is a connector that has a male end and a female end. The male end of the coupling fits over the end of the galvanized pipe, and the female end fits over the end of the plastic pipe. Another way to connect galvanized pipe to plastic is to use a transition fitting. A transition fitting has one male end and two female ends. The male end of the transition fitting fits over the end of the galvanized pipe, and the two female ends fit over the ends of the plastic pipes.


To Summarize

To connect galvanized pipe without threads to PVC, a coupling must be used. The coupling has a female threaded end that screws onto the galvanized pipe, and a PVC end that slides over the PVC pipe.

Posts created 1453

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top