How To Remove A Soldered Copper Fitting

Removing a soldered copper fitting can be a difficult task. The most important thing to remember is to be patient and take your time. There are a few different methods you can use to remove a soldered copper fitting, but the most common is to use a propane torch.

How To Remove A Soldered Copper Fitting

There are a few ways to remove a copper fitting that has been soldered in place. One way is to use a propane torch to heat the solder until it liquefies. Once the solder is liquefied, you can use pliers to twist and pull the fitting free. Another way to remove a soldered copper fitting is to use a hacksaw blade. Cut through the solder joint between the fitting and the pipe, then twist and pull the fitting free.

-copper fitting -solder -torch -tin snips – flux -soldering iron

  • Use a soldering iron to heat the fitting and remove it from the copper pipe
  • Use a desoldering gun or pump to remove the solder from the fitting

-Use a soldering iron to heat the copper fitting until the solder melts. -Remove the soldering iron and allow the copper fitting to cool. -Use a pair of pliers to twist and remove the copper fitting from the pipe.


Frequently Asked Questions

How Do You Clean Copper Pipes Before Soldering?

There are a few ways to clean copper pipes before soldering. One way is to use a wire brush to scrub off any dirt, corrosion, or paint. Another way is to use a vinegar and salt mixture to create a chemical reaction that cleans the copper.

Can Soldered Copper Fittings Be Reused?

Yes, copper fittings can be solder and reused as long as the fittings are in good condition.

Can You Resolder Copper Pipe?

Yes, you can resolder copper pipe. You will need a soldering iron, solder, flux, and pipe cleaner. First, clean the area around the leak with the pipe cleaner. Next, apply flux to the area and heat the solder to flowing temperature. Finally, apply the solder to the joint and hold until it cools.

Can You Solder And Solder Copper Pipe?

Yes, you can solder copper pipe. Soldering is a process of using heat to join two pieces of metal together. In the case of copper piping, a soldering iron is heated until it is red hot and then used to melt solder onto the joint. The solder will flow over the joint and create a seal.

What Is The Best Copper Cleaner?

The best copper cleaner is a product called Brasso. It is a metal polish that can be used to clean tarnished copper as well as other metals.

Do You Need To Clean Copper Pipes Before Soldering?

It is recommended to clean copper pipes before soldering, in order to remove any oxidation or other contaminants that may be on the surface of the pipe. Failure to do so may result in a poor solder joint.

Should You Clean Copper Pipes?

Yes, it is generally recommended to clean copper pipes regularly to prevent clogs and corrosion.

How Do I Remove A Stubborn Solder Copper Pipe?

Use a torch to heat the solder joint on the copper pipe until the solder liquefies. Apply a soldering iron to the opposite side of the joint and push the iron toward the solder joint. When the solder begins to flow, remove the soldering iron.

Can You Solder Copper To Copper?

Yes, you can solder copper to copper. The two metals have a very high affinity for each other, so they form a strong bond when heated.

Can You Solder Copper With Copper Solder?

Yes, it is possible to solder copper with copper solder. This is a common practice in plumbing and other applications where two pieces of copper need to be joined. The soldering process creates a strong bond between the two pieces of copper, allowing them to function as one unit.


In Closing

Removing a soldered copper fitting is a difficult task. It can be done by using a propane torch to heat the solder joint until the solder liquefies. The fitting can then be removed by using a pair of pliers.

Posts created 473

Leave a Reply

Your email address will not be published.

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top