How To Shim Toilet

Shimming a toilet is a method of adding height to the toilet so that it can be used by a person in a wheelchair. It can also be used to make the toilet more comfortable for people with other disabilities. The height of the toilet can be adjusted by adding shims, which are thin pieces of wood or metal, under the toilet’s base.

How To Shim Toilet

There are a few things you can do to shim your toilet. You can use a piece of wood, shims, or even a folded-up towel. If your toilet rocks back and forth, it is likely because the floor isn’t completely flat where the toilet is installed. This can be fixed by using a piece of wood or shims to raise one side of the toilet so that it is resting on a flat surface. If you are using a piece of wood, make sure

-Tape measure -level -pencil -toilet plunger -toilet snake -wrench -screwdriver -pliers

  • Place a shim (piece of thin wood) under the toilet tank so that it is level
  • Reattach the tank to the bowl and tighten the bolts
  • Unscrew the toilet tank bolts and remove the tank from the bowl

below -If the toilet is slightly off level, you can use a shim to adjust it. -A shim is a thin piece of wood or metal that can be inserted under the toilet to raise one side or the other. -Make sure the shim is wide enough to cover the entire base of the toilet and that it is sturdy enough not to move. -Once the shim is in place, check to make sure the toilet is level and adjust as necessary


Frequently Asked Questions

Are You Supposed To Shim A Toilet?

A toilet should not require shimming; if it does, there may be a problem with the toilet’s installation.

What Happens If The Toilet Flange Is Not Level?

If the toilet flange is not level, the toilet may leak.

How Do You Shim A Toilet Tank?

The most common way to shim a toilet tank is with a piece of wood or metal. This is inserted into the space between the tank and the bowl to adjust the height and fix any leaks.

How Do I Hide The Shims Under My Toilet?

Shims can be hidden under a toilet by placing them between the toilet and the floor. This can be done by removing the toilet lid and placing them directly under the screws on the bottom of the toilet or around the outside edge.

How Do You Shim A Toilet On An Uneven Floor?

There are a few ways to shim a toilet on an uneven floor. The most common way is to use shims made from wood or metal. Another way is to use a washer or a piece of rubber on the bottom of the toilet.

How Do You Cut Plastic Toilet Shims?

There is no one definitive way to cut plastic toilet shims. Some people use a hacksaw, while others use a knife or scissors.

Does A Toilet Need To Be Perfectly Level?

A toilet does not need to be perfectly level. However, if it is not level, it can cause problems with the flushing mechanism.

How Do You Shim An Uneven Toilet?

One way to shim an uneven toilet is to use a piece of wood that is the same height as the difference in height between the two toilet surfaces. The wood is then placed under the low surface so that it creates a level surface.

Can You Level A Toilet With Shims?

Yes, you can level a toilet with shims. This can be done by placing the shims under the toilet base until it is level.


In Summary

There are a few ways that you can shim a toilet. You can use foam, wax, or even newspaper. You can also use a toilet shim kit, which is a specifically designed kit that includes all of the materials that you need.

Posts created 473

Leave a Reply

Your email address will not be published.

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top