Tankless water heaters, often called instantaneous or on-demand water heaters, provide hot water only as it is needed. They don’t use a storage tank so you don’t have to wait for the tank to fill up with enough hot water before you can take a shower or run the dishwasher. Rinnai offers two types of […]
How To Cut Copper Pipe Close To Wall
To cut copper pipe close to a wall, you will need a hacksaw and a chisel. First, use the hacksaw to cut the pipe as close to the wall as possible. Then, use the chisel to remove any remaining metal from the pipe. How To Cut Copper Pipe Close To Wall Copper piping is often […]
How To Use Ridgid Shop Vac To Pick Up Water
The Ridgid shop vac is a powerful wet/dry vacuum that can be used to suck up water quickly and easily. To use the Ridgid shop vac to pick up water, simply connect the vacuum hose to the drainage spout and turn on the vacuum. The water will be sucked up into the vacuum and quickly […]
How To Repair Damaged Pipe Threads
If a pipe thread is damaged, the first step is to remove the damage. This can be done with a sharp knife or a thread file. The next step is to clean the threads. This can be done with a wire brush or a tap cleaner. The next step is to lubricate the threads. This […]
How To Cap A Toilet Drain
There are a few ways to cap a toilet drain. The most common is to use a rubber plug. This can be found at most hardware stores. Another way is to use a cork. This can be done by cutting the cork in half and then drilling a hole in the center of it that […]
How To Sand The Inside Of A Pvc Pipe
Sanding the inside of a PVC pipe is a process that is used to remove any rough patches or debris that may be present on the surface of the pipe. This can help to improve the flow of liquid or air through the pipe and can also help to ensure that the pipe is functioning […]
How To Enlarge A Hole In Granite Countertop
There are a few ways that you can enlarge a hole in granite countertop. One way is to use a hammer and chisel to chip away at the granite around the hole. Another way is to use a drill bit to drill a larger hole. How To Enlarge A Hole In Granite Countertop There are […]
How To Remove Old Solder From Copper Pipe
Soldering is a process of permanently joining metal parts by melting and flowing a filler metal into the joint, between the parts to be joined. It is commonly used in plumbing to join copper pipes. Over time, the solder can corrode and build up on the pipe, making it difficult to remove. Here are a […]
How To Cut A Copper Pipe In A Tight Space
One way to cut a copper pipe in a tight space is to use a tubing cutter. This can be done by placing the cutter over the pipe and tightening the handle, which will cause the blade to cut through the pipe. How To Cut A Copper Pipe In A Tight Space When working with […]
How To Level A Bathtub
There are a few ways to level a bathtub. The most common is to use shims, which are thin pieces of wood or metal that you place under the legs of the bathtub to adjust the height. Another way is to use a level and adjust the height of the legs accordingly. How To Level […]